BS 1088:2018规定了两类船用胶合板的要求:标准；重量轻，主要用于制造船舶以及其他海上和水路运输工具 应用。这些要求还考虑到在建筑施工中使用海洋胶合板。 BS 1088特别强调了胶合板对生物劣化和粘结损失的抵抗力 力量与时间同在。它没有为其他可能额外增加的财产作出规定 与特定的最终用途相关。 按照本标准制造的胶合板可能还需要满足以下要求: 本标准未涵盖的特定于其最终用途的立法和/或标准。特别是在建筑施工方面，经验表明，快速进水 在建造过程中，面板边缘可能会导致芯部不均匀膨胀，导致 木材纤维的局部灾难性断裂，因此出现分层现象。如果 建筑防水外壳的后续完整性未得到维护，类似问题 可能会出现。BS 1088无法对此类事件做出规定，因为单板种类的选择是基于 仅取决于密度和抗生物退化能力。交叉引用:BS EN 324-1BS 1203BS EN 324-2BS EN 314-1BS EN 326-1BS EN 322BS EN 636BS EN ISO 3166-1BS EN 335:2013BS EN 350:2016BS EN 314-2:1993DD CEN/TS 1099BS EN ISO 9000BS EN 1995-1-1-1建筑产品法规2013BS EN ISO 9000-1BS EN 313-2BS EN 326-3BS EN 13986BS EN 923BS 6100-4.3:1984BS EN ISO 9001:2015BS ISO 9000-2:1997购买时所有现行修订版均可用包括在购买本文件时。

BS 1088:2018 specifies requirements for two classes of marine plywood:standard; andlightweight,intended for use primarily in the manufacture of marine craft and in other marine and waterway applications.The requirements also take into consideration the use of marine plywood in building construction. BS 1088 addresses in particular the resistance of plywood to bio-deterioration and loss of bond strength with time. It does not make provision for other properties which might additionally be relevant in a particular end use.Plywood made in accordance with this standard might also need to meet additional requirements in legislation and/or standards specific to its end use that are not covered by this standard.With particular reference to building construction, experience has shown that rapid ingress of water at the panel edge during the build process can cause differential swelling in the core, resulting in localized catastrophic rupture of the wood fibres, thus giving the appearance of delamination. If subsequent integrity of the waterproof envelope of the building is not maintained, similar problems can arise. BS 1088 cannot make provision for such events since the choice of veneer species is based only on density and resistance to bio-deterioration.Cross References:BS EN 324-1BS 1203BS EN 324-2BS EN 314-1BS EN 326-1BS EN 322BS EN 636BS EN ISO 3166-1BS EN 335:2013BS EN 350:2016BS EN 314-2:1993DD CEN/TS 1099BS EN ISO 9000BS EN 1995-1-1Construction Products Regulations 2013BS EN ISO 9000-1BS EN 313-2BS EN 326-3BS EN 13986BS EN 923BS 6100-4.3:1984BS EN ISO 9001:2015BS ISO 9000-2:1997All current amendments available at time of purchase are included with the purchase of this document.

BS 1088-2018